RavenNuke 2.40.00 - used with NukeC 3.7.5

Posted: Thu Jun 17, 2010 12:51 pm

Hey Bobby:

When I used phpNuke with NukeC 3.7.4, I could see my categories. RavenNuke 2.40 used with NukeC 3.7.5 show no categories. What could be the problem?

Thank you.
There are 1 Ads and 0 Categories In Our Database.

Posted: Fri Jun 18, 2010 1:12 am

I will look at it as soon as I can. Probably this weekend.

Posted: Fri Jun 18, 2010 1:17 am

I assume this is a fresh install. If so, after you ran the installer, did you have any categories created? If not, it could be the table could have timed out when you ran the installer.

Posted: Fri Jun 18, 2010 10:19 am

I did not create any new categories if that what you mean. It is a fresh installation.
When I go into phpMyAdmin, It show 145 categories, but they do not appear when posting.
Folder permission is set to 777.

What do you mean by: TIMED OUT?

Thanks

Posted: Fri Jun 18, 2010 11:46 am

If they are in phpmyadmin, it did not time out. I will do some more testing and see if I can recreate the issue. Try downloading it again and reinstall it.

Posted: Fri Jun 18, 2010 1:14 pm

Before contacting you I reinstalled NuckeC 3.7.5 about three times by uploading all Folders and Files to replace current Folders and Files on the server. Then I uploaded the install file with a success message at the end. I then deleted the install file.

Thanks as always,
Mike

Posted: Sat Jun 19, 2010 2:22 am

I deleted NukeC 3.7.5 module and tables inside of phpMyAdmin. I then re-installed NukeC tables and nothing changed. Everything looks normal except categories still not showing up.

Thank you.

Posted: Sat Jun 19, 2010 10:45 pm

I am still looking into this Mike. I need some more information. If you could, send me a PM with your site name. Also, if you click on the disclaimer, is there any info there? I am working on a revised installer that may fix the issue. It will not be ready for a few more days though.

Posted: Sun Jun 20, 2010 8:26 am

Currently this subdomain is locked. Yes! SubDomain. I forget to tell you, because RavenNuke 2.40 has a subdomain configuration. phpMyAdmin and NukeC 3.7.5 Disclaimer is correct, but do not display.

I�m now thinking a Path problem. I had similar display problems before when I installed RavenNuke 2.40 on its subdomain.

I hope this help.

Thank you.

Posted: Tue Jun 22, 2010 7:05 am

I played with the following NukeC 3.7.5 Paths under RavenNuke 2.40 subdomain:
modules/NukeC/imageads/
modules/NukeC/imagecatg/

Nothing got better or worse. It�s as if NukeC 3.7.5 and phpMyAdmin settings has no affect on the categories. The one ad I posted appear just fine.

Thanks

Posted: Wed Jun 23, 2010 11:18 pm

I will set up a test RN install in a subdomain as soon as I can and test it.

Posted: Thu Jun 24, 2010 4:23 am

Visitors can not see the list of Categories or the Disclaimer Link, but they can see the one Ad posted and able to view Details. Ad display is perfect. Upload Image is turned off.

If I edit the Ad, I am able to see and choose the Categories.

Even though, the Subdomain and the Destination Root Subfolder has a different Name, RavenNuke 2.40 has been set to work perfectly. This link solved many major problems I had with RavenNuke and phpNuke installed on a Subdomain. This link supports Domains and Subdomains Installations. THIS LINK DO NOT SUPPORT NUKEC.

http://www.ravenphpscripts.com/postx11296-0-0.html

* Sign-In Problems
* Could Not Access The Admin Panel
* Users Could Not Upload Images
* Could Not Send Or Receive Private Messages And Emails.
* Invalid Activation Address For New Registrations
* Blank White Screens

Thanks

Posted: Mon Jun 28, 2010 2:45 am

In config.php, are the values for $prefix and $user_prefix the same? Also try adjusting the folder permissions to 755 and file permissions to 644.

Posted: Tue Jun 29, 2010 7:58 am

Yes, they are the same.
$prefix = 'nuke';
$user_prefix = 'nuke';
$dbtype = 'MySQL';

From what folder should I start permissions?

Thank you.

Posted: Tue Jun 29, 2010 8:38 am

In the nuke c module folder.